A grandfather clock is an impressively large and old clock with several moving and interlocking elements. The clock, even if it is not running, will still require some maintenance to maintain it in working order over time. The quality of your grandfather clocks may be preserved and protected by following these simple steps. Continue reading more about Grandfather clock repair Avon IN.
It should not be exposed to direct sunlight. The casing might break and the gloss can fade if exposed to direct sunlight or too high temperatures or humidity. Store your clock in a cool, dark place to preserve it in pristine condition and prevent damage.
Do not unlock the door. Always remember to close and lock the door of your Howard Miller Grandfather Clock. This will prevent additional dust and dirt from settling on the moving components and slowing down or damaging the timepiece. In addition, a closed and locked door prevents dogs and youngsters from accessing the sensitive components.
Twice a week, wind the clock. Your grandfather clock has to be wound about once per week. As a result, the clock is less likely to cease working at inconvenient times. After you have wound it, adjust the time by moving the minute hand to the right position. Adjusting the nut on the pendulum rod will speed up or slow down the clock as needed.
Please check the scales. The weights on the grandfather clock serve as the device's power source. Following the washing of the hands, a second check of the weights should be done to ensure that they have not broken apart.
Investigate the Equalizers if you can. A clock that is not perfectly accurate might throw off the time. It is important to do routine maintenance checks on the levelers that are located at the base of the clock. If the clock is not resting perfectly still on the ground, the problem most likely lies with the legs not being balanced. Click here to learn more about clocks repair.
Make sure the Oil is good. If the oil level in a grandfather clock ever gets too low, the mechanism will seize up in the same way as the mechanism in a car will if the oil level gets too low. Winding the clock does not need you to re-oil the movements each time you do so; nonetheless, you should constantly make sure that they have sufficient lubrication so that they can run smoothly. The clock movements found in the majority of brands need to be oiled no more frequently than once every two years. When oiling the mechanisms, make sure to protect them from damage by using latex gloves and using an oil designed specifically for clocks.
The mechanisms of the clock must be thoroughly cleaned. Once every five to ten years, the movements of the grandfather clock need to have a thorough cleaning performed on them. When it comes to fixing your clock, you should always use an experienced and reputable firm. It is possible that doing repairs yourself might wind up causing more problems than they solve, especially if you lose screws or other parts, or if you end up damaging the movement.
